How to Draw a Christmas Hat Step by Step TUTORIAL

Download Article

Download Commodity

Making your own Santa hat is like shooting fish in a barrel and it volition exist a lot better in quality than the ones sold past the dollar store. The most traditional lid is fabricated out of velvet or faux fur, but you can brand simpler ones out of paper. You lot can even brand a mini Santa lid headband!

  1. one

    Carve up your head circumference by 2. Take a measuring tape and wrap information technology around your caput where you want the hat to sit. Take the measuring tape off, note your measurement, and then dissever it by 2.[one]

    • For instance, if your caput circumference is 22 inches (56 cm), then your new measurement is 11 inches (28 cm).
    • If yous do not accept a measuring tape, wrap a piece of cord around your caput, and then concur it against a ruler.

  2. 2

    Draw a triangle on a sheet of paper based on your new measurement. The base of operations of the triangle should exist half of your caput circumference. The height of the triangle should be whatsoever height you want the hat to exist.[ii]

    • Drape a measuring record across the height of your caput. Make up one's mind where you want the tip of the lid to hang, and then utilize that measurement for the height.
    • For an adult chapeau, brand it about xiv inches (36 cm) tall. For a child'due south hat, make it about 13 inches (33 cm) tall. Only information technology also depends on a person'southward height. [three]

    Advertizing

  3. iii

    Draw a curve along the bottom border of the triangle. Tie a pencil to a piece of string. Hold the finish of the string at the tip of the triangle, so place the pencil at the bottom left corner of the triangle. Belongings the string taut, swing the pencil towards the lesser right corner of the triangle, creating an arch.[iv]

    • You can also use a pen or marker instead of a pencil. If you lot accept a compass, you tin can use that, besides.
    • The bend needs to first at 1 corner and cease at the other. Y'all want to end up with a triangle with a curved lesser.
    • You can draw the curve by hand instead. It won't be as swell or precise, but it will do.

  4. iv

    Cut your design out, then trace it onto a piece of folded textile. Fold a canvas of red fabric in half with the wrong side facing out. Place the design on top of the fabric, with ane of the triangle's diagonal edges along the fold. Trace the triangle with a tailor'due south chalk or pen.[5]

    • Dandy fabrics to utilise include: faux fur, velvet, fleece, flannel, and felt.
    • Brand certain that you are cut along the curved line and so that the triangle has a curved bottom edge and non a straight edge.

  5. five

    Cutting the pattern out adding a 1⁄2  in (ane.3 cm) seam allowance. Because 1 of the diagonal edges is already forth the fold, you simply need to add together seam allowances to the bottom curved edge and the other diagonal edge. This is important. If y'all do not add seam allowances, the lid will plow out too modest.[6]

  6. 6

    Run up the border using a straight sew together and a 1⁄two  in (1.3 cm) seam allowance. Beginning at the bottom of the triangle and finish at the top. Match the thread colour to the textile equally closely as possible. If you need to, use sewing pins to hold the triangle together, but call back to have them out when you are done.

    • Information technology will be faster to do this on a sewing motorcar, only you can exercise it past hand. If you are using a sewing machine, backstitch when you lot start and finish sewing and then that the stitches don't come undone.
    • If y'all don't know how to stitch, glue the seam together using hot glue or cloth glue.[7]

  7. vii

    Cut a strip of white faux fur for the trim. Cutting a strip of white fuzzy cloth one inch (two.five cm) longer than your head circumference. You need to make the strip twice as wide every bit you lot want the trim to be, plus 1⁄ii inch (i.iii cm) for the seam allowance. For case, if yous want it to be 2 inches (5.1 cm) wide, cut information technology 4 ane⁄2 inches (eleven cm) wide.[viii]

    • White fur is the most pop, but you tin utilize white felt or fleece as well.
    • If you lot aren't sewing the chapeau, brand the strip the same width that you want the trim to be. For case, if you want it to exist 2 inches (5.1 cm) wide, and so cut it ii inches (5.1 cm) wide.

  8. 8

    Stitch the ends of the fur with a straight stitch and a 1⁄2  in (1.3 cm) seam. Fold the fur trim in one-half with the wrong sides facing out. Make sure that the narrow edges friction match up, and so stitch across them using a straight stitch and a one⁄2  in (one.three cm) seam assart. Employ white thread for this.

    • Again, you lot can do this past hand or on a sewing machine. If yous are using a sewing machine, remember to back run up.
    • Because of how curt the ends of the fur trim are, y'all shouldn't accept to use sewing pins. If you need to utilise them, however, think to pull them out when you are done.

  9. 9

    Slide the trim over the bottom of the lid and sew information technology in identify. Turn the hat correct-side-out, but keep the fur turned inside-out. Slide the trim over the lesser of the hat, and so sew forth the lesser border using a 1⁄2  in (1.three cm) seam allowance. Use white or reddish thread and a directly stitch.[9]

    • If yous don't know how to sew, turn the trim right-side-out and slide information technology over the lesser edge of the trim. Glue it downward with hot gum or textile glue.[10]
    • Brand sure that the side seam on the fur trim matches upwards with the side seam on the chapeau.

  10. x

    Fold the fur trim downward, then fold and stitch the raw edge into the hat. Keep the lid turned right-side-out. Pull the fur trim downwardly to reveal the right side. Fold the trim in half by tucking the bottom raw edge into the hat. Sew together the lesser raw edge to the inside seam. You can as well mucilage it to the inside of the chapeau instead.[11]

    • Skip this step if you lot glued the fur trim down.
    • Y'all tin stitch the fur by mitt or on a sewing motorcar with a straight stitch. If you are using a sewing motorcar, call back to backstitch.

  11. 11

    Sew or mucilage a pompom to the tip. Buy a large pompom from the kids crafting section of a arts and crafts shop. Secure it to the tip of your hat with hot gum or fabric glue; yous can likewise run up it to the tip of the chapeau by paw.[12]

    • If you can't observe whatever pompoms, you lot can employ a white cotton ball instead.

  12. 12

    Brand a fur pompom for a fancier hat. Employ a drinking glass to trace a iii in (vii.half-dozen cm) circle on a piece of white fur, so cut the circle out. Hand sew a straight or running stitch around the edges of the circle. Pull on the thread to gather the edges of the material and grade a ball. Knot the thread, then sew or glue the ball to the chapeau.[13]

    • You should either run up/glue a pompom or make a fur ball. Don't practise both.

    Advertisement

  1. ane

    Describe an 20 in (51 cm) wide semicircle on a sheet of red paper. Identify a ruler along the bottom edge of your paper. Tie a pencil to a piece of string, so hold the cease of the string against the paper at the ten in (25 cm) marker. Hold the string taut and employ the pencil to depict an arc from the one in (2.5 cm) mark to the 20 in (51 cm) mark.[xiv]

    • You lot tin make a smaller hat by making information technology 18 inches (46 cm) wide instead.

  2. 2

    Cut the semicircle out with scissors. If you see whatever pencil marks, utilise an eraser to get rid of them. If you want to brand a fancier felt hat, use the semicircle you but cut out to trace and cut another semicircle out of red felt.[15]

  3. 3

    Overlap the straight edges of the semicircle to make a cone. How much you overlap the direct edges depends on how big you need the hat to be. The more y'all overlap, the smaller the hat will plough out.[16]

    • Examination the chapeau against your head to see if information technology is the correct size. Tighten or loosen the hat equally needed.

  4. iv

    Staple or gum the chapeau shut. Once you are happy with the fit, take the hat off. Use a stapler to staple the seam of the chapeau down. You volition need 1 staple near the top of the hat and 1 staple near the bottom. For a nicer cease, you tin can use mucilage or fifty-fifty a strip of double-sided record.[17]

    • You can use tacky glue, white school gum, or a gum stick, but you volition demand to pin the hat together while the glue dries. This can take anywhere from 15 to 20 minutes to a few hours.

  5. 5

    Glue cotton balls around the bottom edge of the hat. Tacky mucilage or white school glue will work just fine for this, but you tin can utilize a hot gum gun too. Glue the cotton balls close together so that you don't see whatsoever gaps.[xviii]

    • Don't use white pompoms; they won't give y'all the right look.
    • If you lot can't find cotton wool assurance, cut a strip out of white felt, and use that instead.

  6. half dozen

    Glue a white cotton ball or a white pompom to the superlative of the hat. Place a large drop of hot glue, tacky glue, or white school glue on meridian of your lid. Next, press a white pompom or a cotton ball into the mucilage. Await for the glue to dry earlier wearing the chapeau.[19]

    • Hot glue will ready within minutes. Tacky glue or white school glue volition accept a few hours.

    Advertizement

  1. 1

    Depict a semicircle on a sail of red felt and cut it out. The semicircle needs to be twice every bit wide as you lot want your final chapeau to be. Something effectually vi to viii inches (xv to 20 cm) would be ideal; this volition requite you a cute chapeau that's about iii to 4 inches (vii.6 to 10.2 cm) tall.[20]

    • Alternatively, apply a bowl or plate to trace a full circumvolve. Cutting the circle out, and so cut the circumvolve in half.
    • Use red sparkly felt for a fancier affect!

  2. 2

    Overlap the straight edges of the semicircle to make a cone. How much you overlap the edges by does not actually matter equally long equally information technology is a cone shape. This hat will be likewise pocket-size to fit over your caput like a normal hat anyway; you will be placing it on top of a headband instead![21]

    • If you are using glittery felt, make certain that the glittery side is facing out.

  3. iii

    Hot glue the seams downwardly. One time yous are happy with the shape of your cone, pull the edge away and describe a line of hot gum down it. Apace printing the edge back confronting the cone, and hold it there until the glue sets. This should just take a few minutes.[22]

    • You lot can also use tacky gum or material gum, merely y'all'll have to pin the felt until the glue sets. Material glue will accept about 15 to twenty minutes while tacky glue volition have several hours.

  4. four

    Trace the base of operations of the cone onto red felt, so cut the circumvolve out. Place your cone on meridian of a sheet of matching carmine felt. Trace around the base of the cone using a marker, and then cutting the circle out. You will utilise this for the bottom of the cone so that you lot can adhere it to the headband.[23]

    • Cut just inside the lines that you lot drew, otherwise the circle will end up as well large.

  5. v

    Cut 2 slits into the red felt circle for the headband. Measure the width of your headband starting time. Next, cutting a vertical slit into the left side of your felt circle, about 1⁄2 inch (1.3 cm) from the edge. Cut another matching slit on the right side of the circle, likewise one⁄2 inch (1.3 cm) from the border.[24]

    • Adding slits to the circumvolve will permit you to slide it around on the headband and change its position. It is better than just gluing it on.

  6. vi

    Glue the circle to the bottom of the cone. You tin do this with hot glue, tacky glue, or fabric mucilage. Identify the gum effectually the edges of the felt circle, so printing them confronting the within edges of the cone. You lot will have a slide seam along the inside edge, which is fine.[25]

    • If you are using hot glue, work 1 to 2 inches (2.v to 5.1 cm) at a time, or the glue volition set too fast.
    • If you lot are using fabric glue or tacky glue, pivot the felt while information technology dries.
    • If some of the circle sticks out from under the edge of the cone, trim it off.

  7. 7

    Cut a strip of white faux fur for the brim of your chapeau. Wrap a measuring tape effectually the base of operations of your cone to get the circumference, then cut a strip of white fur co-ordinate to that measurement. Make the fur strip most 1⁄ii to one inch (1.3 to 2.5 cm) wide.[26]

    • You can discover white fur in the kids' crafting department of a craft store. If the fur is too long, cutting it shorter with pair of scissors.
    • If y'all can't find white fur, yous tin can use white felt instead.

  8. 8

    Glue the white fur strip to the lesser edge of your cone. You can do this with hot glue, material mucilage, or tacky glue. If y'all are using hot mucilage, clasp the mucilage out 1 to 2 inches (2.5 to 5.1 cm) at a time before pressing the fur into it. If you squeeze also much mucilage out at once, it will set before yous finish adding the fur.[27]

    • Again, if you utilise tacky glue or fabric glue, yous will demand to pin the fur until it sets.

  9. 9

    Glue a pompom to the acme of the hat. Buy a pack of minor white pompoms from the kids' crafting section of a craft store. Glue the pompom to the tip of the hat, so let the glue set. Hot glue volition work the best for this, but you lot can apply cloth gum too.[28]

    • Tacky glue is not recommended because it takes besides long to dry and the pompom may slide effectually equally it dries. Y'all won't take this issue with fabric glue because it is so thick and dries fast.
    • If you can't find pompoms, effort a cotton fiber ball instead.

  10. 10

    Slide the chapeau onto a headband through the slits. Button the finish of the headband into the left slit, and then go on pushing information technology until it comes out of the right slit. Slide the hat effectually on the headband into your desired position. You can get in sit right on top of the headband or at a slight bending.[29]

  11. 11

    Finished!

    Advertizement

Add New Question

  • Question

    Can I make a Christmas chapeau with glazed paper and cotton?

    Community Answer

    Aye, you may! Make a cone out of the paper, then add the cotton to the top for a Santa lid.

Ask a Question

200 characters left

Include your email address to become a message when this question is answered.

Submit

Ad

Video

  • Your Santa hat does not have to exist cerise and white.

  • Plow it into an elf hat by using green felt or fleece instead of blood-red, and carmine felt or fleece instead of simulated fur.

Thanks for submitting a tip for review!

Advertisement

Things Y'all'll Need

  • Red fabric (felt, fleece, fur, etc.)
  • White faux fur
  • Fabric scissors
  • Measuring tape
  • White pompom (optional)
  • Needle
  • White thread
  • Ruby-red thread
  • Sewing automobile
  • Sewing pins
  • Pencil
  • String
  • Scrap newspaper
  • Tailor'southward chalk or pen
  • Red paper
  • White cotton balls
  • Hot glue or tacky glue
  • Pencil
  • String
  • Ruddy felt
  • White faux fur
  • White pompoms
  • Hot mucilage
  • Headband
  • Pair of scissors
  • Marker

Near This Article

Thanks to all authors for creating a page that has been read 263,870 times.

Did this commodity help you?

DOWNLOAD HERE

How to Draw a Christmas Hat Step by Step TUTORIAL

Posted by: toniweve1962.blogspot.com

How to Draw a Christmas Hat Step by Step TUTORIAL. There are any How to Draw a Christmas Hat Step by Step TUTORIAL in here.